[. . . ] Xyron Adhesive Application & Laminating System User's Guide XYRON 850 XYRON 1200 ® ® The Xyron 850 / Xyron 1200 is designed to be used with one of the following replacement cartridges: SL/DL: Double- and single sided lamination. [. . . ] Remove springs to Cut Blade remove rollers Slides to the left and right to cut output and cut-blade. Also can be used to trim excess material from leading edge of document. Setting Up Remove the Xyron System and Document Feed Tray from the packaging. The System is shipped with a sample supply cartridge already installed. Install the feed tray by inserting it horizontally into the cartridge opening by the grooves in the left and right dispenser side plates as shown below. When correctly installed, the tray will rest horizontally. Document Feed Tray Assembly Cartridge (reference) Lower groove in dispenser side plates Upper groove in dispenser side plates Step 2 - Gently guide the document forward while turning the handle clockwise. Basic operation Step 1 - Insert and align document on feed tray. Align to the left for letter size documents, to the right for A3/A4 documents. Step 3 - Trim to desired length using the cut blade at the roller exit. Apply pressure down on the orange blade holder and slide to the left or right. EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500 GB Cartridge Replacement Remove used supply cartridge by pulling outward. [. . . ] USA Xyron Europe A/S Xyron Asia © 2001 Xyron, Inc. EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500 [. . . ]